HEIDENHAIN TNC 620 User Manual page 436

15
Touch Probe Cycles: Automatic Workpiece Inspection | MEASURE ANGLE (Cycle 420, DIN/ISO: G420,
software option 17)
Q301 Move to clearance height (0/1)?: Definition
of how the touch probe is to move between the
measuring points:
0: Move at measuring height between measuring
points
1: Move at clearance height between measuring
points
Q281 Measuring log (0/1/2)?: Define whether the
TNC should create a measuring log:
0: Do not create a measuring log
1: Create a measuring log: The TNC saves the log
file TCHPR420.TXT as standard in the directory
TNC:\
2: Interrupt program run and output measuring log
to the TNC screen (Press NC start to continue the
program)
436
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 10/2017