HEIDENHAIN TNC 620 User Manual page 397

Touch Probe Cycles: Automatic Presetting | PRESET FROM OUTSIDE OF CIRCLE (Cycle 413, DIN/ISO: G413,
software option 17)
Q382 Probe TS axis: Coord. 1st axis? (absolute):
Coordinate of the probe point in the reference axis
of the working plane at which point the preset is
to be set in the touch probe axis. Only effective if
Q381 = 1. Input range -99999.9999 to 99999.9999
Q383 Probe TS axis: Coord. 2nd axis? (absolute):
Coordinate of the probe point in the minor axis
of the working plane at which point the preset is
to be set in the touch probe axis. Only effective if
Q381 = 1. Input range -99999.9999 to 99999.9999
Q384 Probe TS axis: Coord. 3rd axis? (absolute):
Coordinate of the probe point in the touch probe
axis, at which point the preset is to be set in the
touch probe axis. Only effective if Q381 = 1. Input
range -99999.9999 to 99999.9999
Q333 New preset in TS axis? (absolute):
Coordinate in the touch probe axis at which the
TNC should set the preset. Default setting = 0.
Input range -99999.9999 to 99999.9999
Q423 No. probe points in plane (4/3)?: Define
whether the TNC should measure the stud with 4
or 3 probing points:
4: Use 4 measuring points (standard setting)
3: Use 3 measuring points
Q365 Type of traverse? Line=0/arc=1: Definition
of the path function with which the tool is to move
between the measuring points if "traverse to
clearance height" (Q301=1) is active:
0: Move in a straight line between machining
operations
1: Move in a circular arc on the pitch circle
diameter between machining operations
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 10/2017
14
397