No. 08: Set_Auto_Address_Enable - Siemens SIMATIC ET 200SP Manual

Using the command interface
9.4 Description of the AS-i commands
9.4.12

No. 08: Set_Auto_Address_Enable

Meaning
This command enables or disables the "Automatic address programming" function.
The bit AUTO_ADDR_ENABLE is stored in non-volatile memory. It is retained even after
startup or warm restart of the AS-i master.
Structure of the job data in the send buffer
Table 9- 23 Structure of the job data in the send buffer
Byte
Bit 7
0
1
118
Bit 1
Command number: 0B
0
Meaning
H
Value for AUTO_ADDR_ENABLE
1 = Automatic address programming enabled
0 = Automatic address programming disabled
AS-Interface master CM AS-i Master ST (3RK7137-6SA00-0BC1)
Manual, 07/2017, A5E02655262020A/RS-AD/004
Bit 0