No. A6: Get_Permanent_Configuration - Siemens SIMATIC ET 200SP Manual

9.4.7

No. A6: Get_Permanent_Configuration

Meaning
The configuration data (configured CONF data) of an addressed AS-i slave stored on the
EEPROM of the AS-i master are read with this command:
● IO code
● ID code
● ID1 code
● ID2 code
The configuration data are defined by the manufacturer of the AS-i slave. The meaning of
the configuration data is described in the "AS-Interface Complete Specification".
Structure of the job data in the send buffer
Table 9- 16 Structure of the job data in the send buffer
Byte
0
1
Structure of the response data in the receive buffer
Table 9- 17 Structure of the response data in the receive buffer
Byte
Bit 7
0
1
2
3
AS-Interface master CM AS-i Master ST (3RK7137-6SA00-0BC1)
Manual, 07/2017, A5E02655262020A/RS-AD/004
Command number A6
IO code
ID1 code
9.4 Description of the AS-i commands
Meaning
H
Slave address
Meaning
Bit 4 Bit 3
0
0
Using the command interface
ID code
ID2 code
Bit 0
113