Siemens SIMATIC ET 200SP Manual page 102

Using the command interface
9.3 Command interface with controllers of other manufacturers
Return value
Processing errors are itemized in the return value of the response buffer, if necessary. An
error indication exists when "ended without error and without response data or ended with
error" is displayed in the status nibble (coding: 0001
Table 9- 2 Return value in the response buffer
STATUS
0000 Job completed without errors
H
8381 The AS-i slave address is incorrect.
H
8382 The AS-i slave is not activated (not in LAS).
H
8383 Error on the AS-Interface
H
8384 The command is not permitted in the current state of the AS-i master.
H
8385 An AS-i slave with address 0 exists.
H
8386 The AS-i slave has impermissible configuration data (IO, ID, ID2, or ID1 code).
H
83A1 The referenced AS-i slave was not found on the AS-Interface.
H
83A2 An AS-i slave with address 0 exists.
H
83A3 An AS-i slave with the new address already exists on the AS-Interface.
H
83A4 The AS-i slave address cannot be deleted.
H
83A5 The AS-i slave address cannot be set.
H
83A6 The AS-i slave address cannot be permanently saved.
H
83A7 Error while reading the ID1 code
H
83A8 The destination address is not plausible: e.g. a B slave address is used for a standard slave.
H
83B1 A length error occurred during the string transfer in accordance with Profile 7.4.
H
83B2 A protocol error occurred during the string transfer in accordance with Profile 7.4.
H
83C0 The AS-i slave has an invalid profile, e.g. the standard slave or A slave is configured at a B address.
H
83C1 The standard slave cannot be configured, because the B address is already assigned.
H
83F8 The job number or the job parameter is not known.
H
83F9 The AS-i master has detected an EEPROM error.
H
Note
Errors that occur during processing of acyclic services and are reported via call parameters,
such as "Return Value", can be found in the documentation of the relevant programming
interface.
102
).
H
Meaning
AS-Interface master CM AS-i Master ST (3RK7137-6SA00-0BC1)
Manual, 07/2017, A5E02655262020A/RS-AD/004