Siemens SIMATIC ET 200SP Manual page 17

View of the module
Figure 3-1
Properties
● Technical properties
– AS-i master acc. to AS-Interface Specification 3.0
– Transmission of digital I/O values to cyclic process image
– Transmission of analog I/O values in the cyclic process image (Firmware V1.1 and
– Configuration button can be connected to terminals
● Supported functions
– I&M identification data
– Firmware update
– Configuration of the AS-i master and AS-i slaves via data records (Read / Write or
The module can be used with the following engineering versions:
Table 3- 1 Version dependence of the CM AS-i Master ST engineering versions
Firmware version of the
module
V1.0
V1.1
AS-Interface master CM AS-i Master ST (3RK7137-6SA00-0BC1)
Manual, 07/2017, A5E02655262020A/RS-AD/004
View of the CM AS-i Master ST
higher) or via acyclic data record communication.
command interface)
STEP 7
(TIA portal)
V12 and higher
V13 SP1 and higher
3.1 Characteristics of the CM AS-i Master ST
STEP 7
V5.5
V5.5 SP3 HF5 and higher
V5.5 SP3 HF5 and higher
Product overview
GSD file
X
X
17