No. A8: Read_Actual_Configuration - Siemens SIMATIC ET 200SP Manual

9.4.9

No. A8: Read_Actual_Configuration

Meaning
This command reads the following configuration data of an addressed AS-i slave obtained
from the AS-i master on the AS-Interface:
● IO code
● ID code
● ID1 code
● ID2 code
The configuration data are defined by the manufacturer of the AS-i slave. The meaning of
the configuration data is described in the "AS-Interface Complete Specification".
Structure of the job data in the send buffer
Table 9- 19 Structure of the job data in the send buffer
Byte
0
1
Structure of the response data in the receive buffer
Table 9- 20 Structure of the response data in the receive buffer
Byte
Bit 7
0
1
2
3
AS-Interface master CM AS-i Master ST (3RK7137-6SA00-0BC1)
Manual, 07/2017, A5E02655262020A/RS-AD/004
Command number: A8
IO code
ID1 code
9.4 Description of the AS-i commands
Meaning
H
Slave address
Meaning
Bit 4 Bit 3
Reserved
Reserved
Using the command interface
ID code
ID2 code
Bit 0
115