2Ro No 24 Vdc To 120 Vdc/5 A, 24 Vdc To 230 Vac/5 A Digital Electronic Module (6Es7132-4Hb01-0Ab0) - Siemens Simantic ET 200S Manual

3.19 2RO NO 24 VDC to 120 VDC/5 A, 24 VDC to 230 VAC/5 A digital electronic module (6ES7132-4HB01-0AB0)

3.19 2RO NO 24 VDC to 120 VDC/5 A, 24 VDC to 230 VAC/5 A digital
3.19
electronic module (6ES7132-4HB01-0AB0)
Properties
• Digital electronic module with two relay outputs
• Output current 5 A per output
• Rated load voltage DC up to 120 V / AC to 230 V
• suitable for solenoid valves, DC contactors, and indicator lights
• Isolated from the supply voltage
Caution
The rated power supply voltage of the 2RO NO 24 VDC to 120 VDC/5 A, 24 VAC to
230 VAC/5 A is 24 VDC. The 2RO NO 24 VDC to 120 VDC/5 A, 24 VAC to 230 VAC/5 A
must be in a 24 VDC potential group only (from the power module).
General terminal assignment
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
Terminal assignment for 2RO NO 24 VDC to 120 VDC/5 A, 24 VAC to 230 VAC/5 A (6ES7132-4HB01-0AB0)
Terminal Assignment Terminal
1 13
2 14
3 14
4 n.c.
A4 AUX1
A3 AUX1
ET 200S
Manual, Edition 10/2005, A5E00514527-01
Assignment
5 23 •
•
6 24
•
7 24
•
8 n.c.
A8 AUX1
A7 AUX1
13, 14: Normally open contact, channel 0
23, 24: Normally open contact, channel 1
n.c.: Not connected (max. DC 30 V can be connected)
AUX1: Protective-conductor terminal or potential bus (freely usable
up to 230 VAC)
Digital electronic modules
Notes
3-77