Set Lec (Name) - Avaya Cajun P550R Cli Reference Manual

Chapter 1

set lec (name)

Command Mode
Description
Syntax
Sample Output
1-40
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Configuration
Modifies a LEC name.
* Note: You must disable a LEC each time you make a change to
the configuration. After you make configuration
changes, you must enable the LEC in order for the
changes to take effect.
set lec <lecID> name <lecName>
Table 1-31. Parameters, Keywords, Arguments
Name
lecID
lecName
This example sets the name of LEC 1 to "dawes."
ATM(configure)# set lec 1 disable
LEC 1 has been disabled
ATM(configure)# set lec 1 name dawes
Name dawes has been set for LEC 1
ATM(configure)# set lec 1 enable
LEC 1 has been enabled
Definition
The LEC identifier. The range of values is:
Minimum = 1, Maximum = 128.
The name you wish to assign to the LEC. The
LEC name must be between 1 and 31
characters (alpha or numeric).