ATM-Link Commands
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
ATM-Link commands are used with RFC1483 configurations. These
commands presume that a Virtual Switch Port (VSP) has already
been created. Once a VSP is created, you can use the ATM-Link
commands to create and manage ATM Links within the VSP.
atm-link
set atm-link default-PVC
set atm-link (enable | disable)
set atm-link failover-link
set atm-link mapping
set atm-link name
show atm-link
Avaya ATM Uplink Module CLI Commands
1-9