Show Lec (Learp) - Avaya Cajun P550R Cli Reference Manual

show lec (learp)

Command Mode
Description
Syntax
Sample Output
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
All Modes
Shows the ATM address to MAC address mapping for a LEC. This is
helpful when trying to determine which ATM device in the ATM
network is proxying for a given MAC address.
show lec learp [<lecID>]
Table 1-39. Parameters, Keywords, Arguments
Name
lecID
This example shows the learp cache for LEC ID 2.
ATM-7(configure)# show lec learp 2
LE ARP ID: 5
LAN Destination: 00104B76C0AA
NSAP Destination: 39-0000-0000000000E03B0BD69E-
02E03B0BD69E-14
State: Active
No local: Yes
CPU Route: No
ID: 3
Lec Id: 2QOS Domain
Maximum Unknown Frame Count (C10) : 10
Avaya ATM Uplink Module CLI Commands
Definition
The LEC identifier. The range of values is:
Minimum = 1, Maximum = 128.
If omitted, this command will display all
LEARP entries for all LECs.
If omitted, the list of all LEARP entries will be
displayed.
Type: Learned
route ID: 0
Rate Control:
Atm Destination
: 1
1-49