Set Atm-Link Oam-Loopback - Avaya Cajun P550R Cli Reference Manual
Multiservice switch atm uplink
Hide thumbs
Also See for Cajun P550R:
- Cli reference manual (617 pages) ,
- User manual (605 pages) ,
- Installation manual (62 pages)
Table of Contents
Advertisement
Chapter 1
set atm-link oam-loopback
Command Mode
Description
Syntax
Sample Output
1-16
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Configuration
Enables or disables OAM-Loopback for the ATM-Link. Enabling
OAM Loopback configures the ATM-Link to send an OAM F5 packet
every seconds down the default PVC. The ATM-Link will also echo
OAM cells back along the default PVC.
* Note: This is applicable only to Simple-Bridge and LLC Mux
VSPs. OAM is not supported with Routed VSPs.
set atm-link <link-name> oam-loopback {enable |
disable}
Table 1-13. Arguments, Parameters, Keywords
Name
link-name
enable | disable
This example enables OAM Loopback on ATM Link AvayaLink.
ATM(configure)# set atm-link AvayaLink oam-
loopback enable
OAM Loopback ATM Link AvayaLink set to
enabled.
Definition
Name of the ATM Link.
Use th
e show atm-link <vsportId> [<link-
to get the name of an ATM-Link whose
id>]
name is greater than 10 characters.
Enables or disables OAM loopback for the ATM
Link
Advertisement
Table of Contents
