Miele HR1956 Operating Instructions Manual page 34

Features
Fitting and removing FlexiClip
telescopic runners

Danger of burning.
Make sure the oven heating
elements are switched off and cool.
The FlexiClip runners are fitted in
between the two rails that make up a
shelf level.
The FlexiClip runner with the Miele logo
is fitted on the right.
When fitting the FlexiClip telescopic
runners do not extend them.
 Hook the FlexiClip runner onto the
front of the lower rail of a side runner
(1.) and then push it along the rail into
the oven compartment (2.).
34
 Then secure the FlexiClip runner to
the lower of the two rails as illustrated
(3).
If the FlexiClip runners are difficult to
pull out after fitting, you may need to
pull firmly on them once to release
them.
To remove a FlexiClip runner:
 Push the FlexiClip runner in all the
way.
 Remove the FlexiClip runner by
raising it at the front (1) then pulling it
forwards along the rail and out (2).