Miele HR1956 Operating Instructions Manual page 135

Problem
Function currently not
appears in the
available
display after selecting
the Descale function.
Fault with moisture control -
Moisture plus programme
not available appears in
the display after
selecting Moisture plus
.
Programmes using
moisture will not take in
water.
A noise can be heard
after a cooking process.
The oven has switched
itself off.
Cakes and biscuits are
not sufficiently baked in
the times given in the
chart
Cause and remedy
The steam injection system is faulty.
 Call Miele Service.
The steam injection system is faulty.
 Call Miele Service.
 Use the Fan plus  function instead of the
Moisture plus  function.
Demo mode is activated. The oven can be operated
but the pump for the steam injection system does not
work.
 Deactivate demo mode. See "Settings -
Showroom programme".
The pump for the steam injection system is faulty.
 Call Miele Service.
The fan remains switched on after a cooking
programme (see "Settings - Cooling fan run-on").
The oven will switch itself off automatically to save
energy if no other action is taken within a certain time
frame after switching it on or after the end of a
cooking programme.
 Switch the oven back on.
A different temperature from the one given in the
recipe was used.
 Select the temperature required for the recipe.
The ingredient quantities are different from those
given in the recipe.
 Double check the recipe. The addition of more
liquid or more eggs makes a moister mix which
would take longer to cook.
Problem solving guide
135