Miele HR1956 Operating Instructions Manual page 130

Cleaning and care
 Place the container with the
descaling solution on the floor of the
oven.
 Attach one end of the plastic tube to
the water intake pipe. Place the other
end of the plastic tube in the bottom
of the descaling solution container
and secure the plastic tube to the
container with the suction cup.
 Confirm with OK.
The water intake process will begin. You
will hear the noise of the pump.
You can interrupt and resume the
intake process at any time by
selecting Stop or
The amount of solution specified can be
more than the amount which is actually
taken in. Some of the solution may
therefore be left in the container at the
end of descaling.
A message will appear to confirm that
the intake process is completed.
 Confirm with OK.
130
Start .
The Activation phase will begin. You
can follow the time counting down in
the display.
 Leaving the container together with
the tube connected to the fill pipe in
the oven compartment, pour in
approx. 300 ml water, as the system
sometimes draws in more liquid
during the activation phase.
The system will take in more liquid at
approximately 5 minute intervals. You
will hear the noise of the pump.
The interior lighting and cooling fan
remain switched on for the whole
duration of the process.
At the end of the activation phase a
buzzer will sound if switched on (see
"Settings - Volume - Acoustic
information").