To Delay The Start Time Of The Pyrolytic Cleaning Programme; At The End Of Pyrolytic Cleaning - Miele HR1956 Operating Instructions Manual

Cleaning and care
To delay the start time of the
Pyrolytic cleaning programme
 If you want to delay the start of the
Pyrolytic cleaning programme, select
Start later .
 Confirm with OK.
 Set the time at which you want the
Pyrolytic cleaning programme to
start.
 Confirm with OK.
The door will lock automatically.
and the start time set will appear in the
display.
You can reset the start or finish time via
at any point up to the starting
Change
time.
As soon as the start time has been
reached, the oven heating and cooling
fan will switch on automatically and the
time remaining will appear in the
display.
122

At the end of pyrolytic cleaning

When the duration remaining reaches
0:00 h, a message will appear in the
display to tell you that the door is
unlocking.
When the door lock has been released:
– Process finished
– A buzzer will sound if the buzzer is
switched on (see "Settings – Volume
– Buzzer tones").
 Switch the oven off.
Start at
The visual and acoustic signals are
switched off.

Danger of burning.
Do not remove any pyrolytic residues
until the oven compartment has
cooled down.
 Clean the oven compartment and
pyrolytic accessories to remove any
pyrolytic residues (e.g. ash) that can
build up depending on the degree of
soiling in the oven cavity.
Most residues can be removed with
warm water, a little washing-up liquid
and a clean sponge or a clean, damp
microfibre cloth.
Depending on the level of soiling, a
visible deposit could build up on the
glass on the inside of the oven door.
This can be removed with a
dishwashing sponge, a glass scraper
or a stainless steel spiral and a little
washing-up liquid.
will appear.