Diesel Models: Glow Plug Switch; Function Enable Switch; Engine Start Switch - Genie Z-60/34 Operator's Manual

Operator's Manual
Controls
15 Diesel models: Glow plug switch (if equipped)
Move the glow plug switch to either side and
hold for 3 to 5 seconds.

16 Function enable switch

Move the function enable switch to either side to
enable the functions on the ground control panel
to operate.

17 Engine start switch

Move the engine start switch to either side to
start the engine.
18 15A breaker for engine electrical circuits
19 20A circuit breaker for oil cooler and options
20 15A breaker for control electrical circuits
21 Jib boom up/down switch
Move the jib boom switch up
and the jib boom will raise.
Move the jib boom switch down
and the jib boom will lower.
24
22 Platform level switch
Move the platform level
switch up and the level of
the platform will raise.
Move the platform level
switch down and the level
of the platform will lower.
23 Platform rotate switch
Move the platform rotate
switch to the right and the
platform will rotate to the
right. Move the platform
rotate switch to the left and
the platform will rotate to the
left.
Z-60/34
Seventh Edition · First Printing
Part No. 133083