At The Platform Controls; Test The Horn; Test The Foot Switch; Test The Steering - Genie Z-60/34 Operator's Manual

Seventh Edition · First Printing

At the Platform Controls

Test Emergency Stop
15 Turn the key switch to platform control and
restart the engine.
16 Push in the platform red Emergency Stop
button to the off position.
Result: The engine will shut off after 2 or 3
seconds.
17 Pull out the red Emergency Stop button and
restart the engine.
Test the Hydraulic Oil Return Filter
18 Move the engine idle select switch to high idle
(rabbit symbol).
19 Locate and check the hydraulic filter.
Result: The indicator should be in the green
area.
20 Move the engine idle select switch to foot switch
activated high idle (rabbit and foot switch
symbol).

Test the Horn

21 Push the horn button.
Result: The horn should sound.

Test the Foot Switch

22 Push in the platform red Emergency Stop button
to the off position.
23 Pull out the red Emergency Stop button to
the on position but do not start the engine.
24 Press down the foot switch and attempt to start
the engine by moving the start toggle switch to
either side.
Result: The engine should not start.
Part No. 133083
25 Do not press down the foot switch and restart
the engine.
Result: The engine should start.
26 Do not press down the foot switch and test each
machine function.
Result: The machine functions should not
operate.
Test Machine Functions
27 Press down the foot switch.
28 Activate each machine function control handle
or toggle switch.
Result: All boom/platform functions should
operate through a full cycle.

Test the Steering

29 Press down the foot switch.
30 Press the thumb rocker switch on top of the
drive control handle in the direction indicated by
the blue triangle on the control panel OR slowly
move the control handle in the direction
indicated by the blue triangle.
Result: The steer wheels should turn in the
direction that the blue triangles point on the
drive chassis.
31 Press the thumb rocker switch on top of the
drive control handle in the direction indicated by
the yellow triangle on the control panel OR
slowly move the control handle in the direction
indicated by the yellow triangle.
Result: The steer wheels should turn in the
direction that the yellow triangles point on the
drive chassis.
Z-60/34
Operator's Manual
Inspections
29