Collision Hazards; Bodily Injury Hazard - Genie Z-60/34 Operator's Manual

Seventh Edition · First Printing

Collision Hazards

Be aware of the boom position and tailswing when
rotating the turntable.
Do not operate a boom in the path of any crane
unless the controls of the crane have been locked
out and/or precautions have been taken to prevent
any potential collision.
Part No. 133083
Be aware of limited
sight distance and blind
spots when driving or
operating.
Check the work area for
overhead obstructions
or other possible
hazards.
Be aware of crushing
hazards when grasping
the platform guard rail.
Operators must comply
with employer, job site
and governmental rules
regarding the use of
personal protective
equipment.
Observe and use the
color-coded direction
arrows on the platform
controls and drive
chassis for drive and
steer functions.
Z-60/34

Bodily Injury Hazard

Do not operate the machine with a hydraulic oil or
air leak. An air leak or hydraulic leak can penetrate
and/or burn skin.
Always operate the machine in a well-ventilated
area to avoid carbon monoxide poisoning.
Improper contact with components under any cover
will cause serious injury. Only trained maintenance
personnel should access compartments. Access
by the operator is only advised when performing a
pre-operation inspection. All compartments must
remain closed and secured during operation.
Operator's Manual
Work Area Safety
No stunt driving or
horseplay while
operating a machine.
Do not lower the boom
unless the area below
is clear of personnel
and obstructions.
Limit travel speed
according to the
condition of the ground
surface, congestion,
slope, location of
personnel, and any
other factors which
may cause collision.
13