Table of Contents
Advertisement
Hardware Needed to Complete the Chassis Installation
To complete the chassis installation, you need the following hardware:
•
Eight truss-head mounting screws (included in the shipment)
•
Phillips #2 screwdriver
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
Caution: A fully configured CVX 1800 chassis can weigh about 100 lb.
You should have at least two people to assist you in lifting and holding
the chassis in position at installation time.
Metal Fascia Chassis Installation
Installing the CVX 1800 Chassis
1-21
Advertisement
Table of Contents
