Requirements - Nortel CVX 1800 Hardware Installation Manual

Requirements

Before you connect the CVX 1800 to power and ground at the installation site:
• Refer to your company or site specifications for information on the torque
requirements for securing power and ground cables.
• Read
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
"DC Power Supply Warnings"
Caution: When you plug in the DC power cable, the CVX 1800 access
switch turns on. Since the CVX 1800 chassis does not have a power
switch, you should only apply DC power when you are ready to bring the
CVX 1800 online. Before connecting power cables to the CVX 1800, use
a volt/ohm meter to ensure that the power cables are not live.
Chassis Connections
Connecting Power to the Chassis
on page vii.
3-19