Table of Contents
Advertisement
Power Specifications
Power Options
The CVX 1800 is powered by an AC or DC power source. Use the information in
this section to plan for AC or DC power.
AC Power Requirements
Use the following specifications to plan for AC power.
AC Power Electrical Specifications
The installation site must meet the following AC power requirements:
•
Input voltage: 90 to 240 VAC
•
Receptacle: see
•
Proximity to wall receptacle: within 6 ft (1.8 m)
•
Line frequency: 47 to 63 Hz
•
Volt amperes rating: 175 to 620 VA
•
Input power: 1500 W maximum (fully configured)
•
Fuses: internal (not accessible)
•
Thermal output: 600 to 2100 Btu/hr maximum
External AC Power Supply Specifications
The external AC power supply is capable of supplying N+1 protection for the
CVX 1800. The power supply specifications are:
•
Up to three 1500 W power modules per AC power supply
•
For redundancy with one CVX 1800: two 1500 W power modules per AC
power supply
•
For redundancy with two CVX 1800s: three 1500 W power modules per AC
power supply
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
Plastic Fascia Chassis Technical Specifications
"Power Cords"
on
page A-20
Power Specifications
A-19
Advertisement
Table of Contents
