Table of Contents
Advertisement
Connecting to E1 Interfaces
The E1-DAC-LTM provides 12 or 24 E1 ports and one port for connecting to an
external clocking device.
To connect E1 cables to the E1 ports and to connect the E1-DAC-LTM to an
external clocking device, follow this step:
Step
1
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
Action
Plug the RJ-48C plugs into the receptacles.
12 E1 ports
Note: Using shielded cabling is an electromagnetic interference (EMI)
requirement for CVX 1800 E1 network configurations.
Chassis Connections
Connecting Network Cables
24 E1 ports
Connect to the
telephone network.
Connect to the
external clocking
device (if used).
CVX-0058A
3-11
Advertisement
Table of Contents
