Table of Contents
Advertisement
CVX 1800 Hardware Installation Guide
Connecting Power to the Chassis
Grounding the Chassis
Before connecting the CVX 1800 to either an external AC power supply or a
customer-supplied DC power source, you must attach the ground cable (4 AWG to
8 AWG) to a suitable electrical ground at your facility. Grounding the frame is
required for either powering option, and is the same for both options.
Grounding Options
There are two ways to ground the CVX 1800 chassis:
•
Use the NEBS-compliant dual-connector posts.
•
Use the compression terminal (not NEBS-compliant).
3-20
CVX-0080D
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
Advertisement
Table of Contents
