CVX 1800 Hardware Installation Guide
Cable Specifications
Ethernet 10/100BASE-TX Interface Cable Specifications
The Ethernet 10/100BASE-TX interfaces provide unshielded twisted pair (UTP)
support.
The folllowing figure shows the Ethernet 10/100 Base-TX interface connector:
Ethernet 10/100 Base-TX Pin and Signal Assignments
The following table lists the pin and signal assignments for these interfaces:
Pin
1
2
3
4
5
6
7
8
A-12
8
7
6
5
4
3
2
1
Standard Interface
Signal
TD+ (Transmit to UTP)
TD- (Transmit to UTP)
RD+ (Receive from UTP) TD+ (Transmit to UTP)
Not used
Not used
RD- (Receive from UTP)
Not used
Not used
CVX-0103A
Crossover
RD+ (Receive from UTP)
RD- (Receive from UTP)
Not used
Not used
TD- (Transmit to UTP)
Not used
Not used
296-1011-200 Rel. 5.0, Doc. Rev. 08.01