CVX 1800 Hardware Installation Guide
Connecting Power to the Chassis
4
5
3-28
Use a 1/4-inch flat-tip or Robertson #2 screwdriver to tighten the
locking screws to 18 in-lb.
Turn clockwise
to tighten screws to18 in-lb.
Secure the cables using the cable mount on the lower right corner of
the chassis. The cables run between the two black insulators.
Metal standoffs
Phillips
screwdriver
1/4-inch flat-tip or Robertson #2
screwdriver
Top View
Power cable
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
CVX_0115A
Chassis
Insulators
CVX-0077C