Removing The Top Cover - Nortel Contivity Extranet Switch 2500 Getting Started

Getting Started with the Contivity Extranet Switch 2500

Removing the Top Cover

The following illustration shows you how to remove the top cover from the
Switch. You must remove the cover to:
•
•
1
2
Lift rear of cover up,
and pull aw ay from unit.
Figure 7-1.
1.
2.
3.
7-2
Install LAN or WAN cards.
Install additional memory.
R em ove the three screw s
from the top of the cover
Removing the Top Cover
Turn off the Switch's power and unplug it.
Remove the three screws at the top rear of the chassis.
Slide the top cover back and move it away from the chassis.