Table of Contents
Advertisement
24.1 Overview
The EMG6765-Q10A has 1000Base-T auto-negotiating Ethernet ports. In 10/100/1000 Mbps Gigabit
Ethernet, the speed can be 10 Mbps, 100 Mbps or 1000 Mbps. The duplex mode can be both half or full
duplex. An auto-negotiating port can detect and adjust to the optimum Ethernet speed (10/100/1000
Mbps) and duplex mode (full duplex or half duplex) of the connected device.
24.2 Port Configuration Screen
Use this screen to configure the EMG6765-Q10A port speed and duplex settings. Click Configuration >
Management > Port Configuration.
Figure 101 Management > Port Configuration
The following table describes the labels on this screen.
Table 73 Management > Port Configuration
LABEL
WAN/LAN1~4
Speed
Duplex
Port Configuration
DESCRIPTION
This field displays the Ethernet port of the EMG6765-Q10A.
Select the speed of the Ethernet connection on this port. The choices are Auto, 1000, 100
and 10.
Selecting Auto (auto-negotiation) allows one port to negotiate with a peer port
automatically to obtain the connection speed that both ends support. If the peer port does
not support auto-negotiation or turns off this feature, the EMG6765-Q10A determines the
connection speed by detecting the signal on the cable and using half duplex mode.
Select the duplex mode of the Ethernet connection on this port. The choices are Auto, Full
and Half.
Selecting Auto (auto-negotiation) allows one port to negotiate with a peer port
automatically to obtain the duplex mode that both ends support. If the peer port does not
support auto-negotiation or turns off this feature, the EMG6765-Q10A determines the
connection speed by detecting the signal on the cable and using half duplex mode.
EMG6765-Q10A User's Guide
171
C
H A P T E R
24
Advertisement
Table of Contents
