ZyXEL Communications EMG6765-Q10A User Manual page 28

Table 7 Navigation Panel: Router Mode (Admin) (continued)
LINK TAB
Bandwidth General
MGMT
Queue Setup
Class Setup
UPnP UPnP
USB Media DLNA
Sharing
SAMBA
FTP
Port Port
Configuration
Configuration
MAINTENANCE
General General
Account User Account
Time Time Setting
Firmware Firmware
Upgrade
Upgrade
Backup/ Backup/
Restore
Restore
Restart System Restart This screen allows you to reboot the EMG6765-Q10A without turning the power
Language Language
Diagnostic Ping
Trace Route
Nslookup
Chapter 4 Router Mode
FUNCTION
Use this screen to enable or disable QoS and set the upstream bandwidth.
Use this screen to configure QoS queue assignment.
Use this screen to configure QoS classifiers.
Use this screen to enable UPnP on the EMG6765-Q10A.
Use this screen to have the EMG6765-Q10A function as a DLNA-compliant
media server, that lets DLNA-compliant media clients play video, audio, and
photo content files stored on the connected USB storage device.
Use this screen to enable file sharing through the EMG6765-Q10A.
Use this screen to have the EMG6765-Q10A act as a FTP server.
Use this screen to change the Ethernet port speed and duplex settings.
Use this screen to view and change administrative settings such as system and
domain names.
Use this screen to change the password of your EMG6765-Q10A.
Use this screen to change your EMG6765-Q10A's time and date.
Use this screen to upload firmware to your EMG6765-Q10A.
Use this screen to backup and restore the configuration or reset the factory
defaults to your EMG6765-Q10A.
off.
This screen allows you to select the language you prefer.
Use this screen to ping an IP address.
Use this screen to trace the route packets take to a host.
Use this screen to perform an nslookup (name server lookup).
EMG6765-Q10A User's Guide
28