Table of Contents
Advertisement
Click Configuration > Network > Wireless LAN 2.4G or 5G to open the MAC Filter screen. Select the
1
Enable check box to activate MAC Address Filter.
Select Allow. Then enter the MAC address of Thomas' computer in this screen. Click Apply.
2
Thomas can also grant access to the computers of other members of his family and friends. However,
Josephine and others not listed in this screen will no longer be able to access the Internet through the
EMG6765-Q10A.
6.8 Using Multiple SSIDs on the EMG6765-Q10A
You can configure more than one SSID on a EMG6765-Q10A. See
This allows you to configure multiple independent wireless networks on the EMG6765-Q10A as if there
were multiple APs (virtual APs). Each virtual AP has its own SSID, wireless security type and MAC filtering
settings. That is, each SSID on the EMG6765-Q10A represents a different access point/wireless network to
wireless clients in the network.
Chapter 6 Tutorials
EMG6765-Q10A User's Guide
48
Section 9.4 on page
81.
Advertisement
Table of Contents
