ZyXEL Communications EMG6765-Q10A User Manual page 35

Table 9 Network > LAN > IP (continued)
LABEL
First DNS Server
Second DNS Server
Third DNS Server
Apply
Cancel
Chapter 5 Access Point Mode
DESCRIPTION
Select Obtained From ISP if your ISP dynamically assigns DNS server information (and
the EMG6765-Q10A's WAN IP address). The field to the right displays the (read-only) DNS
server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP
address in the field to the right. If you chose User-Defined, but leave the IP address set
to 0.0.0.0, User-Defined changes to None after you click Apply. If you set a second
choice to User-Defined, and enter the same IP address, the second User-Defined
changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do not configure a DNS
server, you must know the IP address of a computer in order to access it.
Click Apply to save your changes to the EMG6765-Q10A.
Click Cancel to reload the previous configuration for this screen.
EMG6765-Q10A User's Guide
35