Add Interface Group Criteria - ZyXEL Communications EMG6765-Q10A User Manual

Table 53 Interface Group > Add New Group
LABEL
Apply
Cancel

16.2.2 Add Interface Group Criteria

Click the Add button in the Interface Group screen to open the following screen.
Figure 72 Interface Group > Add New Group > Add Interface Group Criteria
The following table describes the fields in this screen.
Table 54 Interface Group > Add New Group > Add Interface Group Criteria
LABEL
DHCP Option 60
Vendor ID
Apply
Cancel
Chapter 16 Interface Group
DESCRIPTION
Click this button to save your settings back to the EMG6765-Q10A.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select this option and enter the Vendor Class Identifier (Option 60) of the matched
traffic, such as the type of the hardware or firmware.
Enter the identification number assigned to the company by the IANA (Internet
Assigned Numbers Authority).
Click this button to save your settings back to the EMG6765-Q10A.
Click Cancel to begin configuring this screen afresh.
EMG6765-Q10A User's Guide
126