Table of Contents
Advertisement
15.1 Overview
This chapter shows you how to configure static routes for your EMG6765-Q10A.
The EMG6765-Q10A usually uses the default gateway to route outbound traffic from computers on the
LAN to the Internet. To have the EMG6765-Q10A send data to devices not reachable through the
default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the EMG6765-Q10A's LAN interface.
The EMG6765-Q10A routes most traffic from A to the Internet through the EMG6765-Q10A's default
gateway (R1). You create one static route to connect to services offered by your ISP behind router R2.
You create another static route to communicate with a separate network behind a router R3
connected to the LAN.
Figure 67 Example of Static Routing Topology
15.2 IP Static Route Screen
Click Network > Static Route to open the Static Route screen.
C
EMG6765-Q10A User's Guide
121
H A P T E R
Static Route
15
Advertisement
Table of Contents
