Table of Contents
Advertisement
This tutorial uses the following example IP settings:
Table 10 IP Settings in this Tutorial
DEVICE / COMPUTER
The EMG6765-Q10A's WAN
The EMG6765-Q10A's LAN
IP Type
Use Interface
A
R's N1
R's N2
B
To configure a static route to route traffic from N1 to N2:
Log into the EMG6765-Q10A's Web Configurator in advanced mode.
1
Click Configuration > Network > Static Route.
2
Click Add Static Route in the Static Route screen.
3
Configure the Add Static Route screen using the following settings:
4
Select Enable in the Static Route field. Enter the Route Name as R.
4a
Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
4b
Select Enable in the Use Gateway IP Address field. Type 192.168.1.253 (R's N1 address) in the
4c
Gateway IP Address field.
Click Apply.
4d
Chapter 6 Tutorials
IP ADDRESS
172.16.1.1
192.168.1.1
WAN
VDSL
192.168.1.34
192.168.1.253
192.168.10.2
192.168.10.33
EMG6765-Q10A User's Guide
45
Advertisement
Table of Contents
