Port BindingConfiguration; Configuring Atm Qos For Multiple Wan Connections - ZyXEL Communications AMG1302-T10A User Manual

Chapter 4 Tutorials
Rule 1 allows a SSH connection from the WAN IP address 1.1.1.1 to IP address 1.1.1.2.
Figure 11 Firewall Example: Rules
4.7 Port Binding Configuration
This tutorial shows you how to configure port binding for WAN connections with different ATM QoS
settings for different types of traffic. The port binding feature is used to group each W AN connection
with specific LAN ports and WLANs. In this example ATM QoS settings are configured for WAN PVCs
for time sensitive VoIP traffic and non-time sensitive data traffic.

4.7.1 Configuring ATM QoS for Multiple WAN Connections

This example shows an application for multiple WAN connections with different ATM QoS Settings.
More than one WAN connection on the Device may be configured to record traffic statistics or
calculate service charges.
Three WAN connections are configured over the ADSL line:
• The connection with VPI/VCI, 0/33, is dedicated for general data transmission.
• The connection with VPI/VCI, 0/34, is dedicated for VoIP service.
To configure bandwidth for the WAN connections, access the WAN configuration Advanced Setup
1
screen by clicking Network > WAN. Click Advanced Setup.
48
AMG1302-T10A User's Guide