Add Interface Group Criteria - ZyXEL Communications EMG3425-Q10A User Manual

Table 47 Interface Group > Add New Group
LABEL
#
Filter Criteria
Back
Apply
Cancel

15.2.2 Add Interface Group Criteria

Click the Add button in the Interface Group screen to open the following screen.
Figure 69 Interface Group > Add New Group > Add Interface Group Criteria
The following table describes the fields in this screen.
Table 48 Interface Group > Add New Group > Add Interface Group Criteria
LABEL
DHCP Option 60
Vendor ID
Apply
Cancel
Chapter 15 Interface Group
DESCRIPTION
This shows the index number of the rule.
This shows the filtering criteria. The LAN interface on which the matched traffic
is received will belong to this group automatically.
Click this button to return to the previous screen without saving any changes.
Click this button to save your settings back to the EMG3425-Q10A.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select this option and enter the Vendor Class Identifier (Option 60) of the
matched traffic, such as the type of the hardware or firmware.
Enter the identification number assigned to the company by the IANA (Internet
Assigned Numbers Authority).
Click this button to save your settings back to the EMG3425-Q10A.
Click Cancel to begin configuring this screen afresh.
EMG3425-Q10A User's Guide
116