Avaya 8600 Technical Configuration Manual page 37

avaya.com
Site2:5(config-if)# ip address 10.0.0.2/32
Site2:5(config-if)# exit
Site 3
CLI
Site3:5# config ip circuitless-ip-int 1 create 10.0.0.3/32
ACLI
Site3:5(config)# interface loopback 1
Site3:5(config-if)# ip address 10.0.0.3/32
Site3:5(config-if)# exit
Site 4
CLI
Site4:5# config ip circuitless-ip-int 1 create 10.0.0.4/32
ACLI
Site4:5(config)# interface loopback 1
Site4:5(config-if)# ip address 10.0.0.4/32
Site4:5(config-if)# exit
Site 5
CLI
Site5:5# config ip circuitless-ip-int 1 create 10.0.0.5/32
ACLI
Site5:5(config)# interface loopback 1
Site5:5(config-if)# ip address 10.0.0.5/32
Site5:5(config-if)# exit
2.2.5.2 CLIP#2 Configuration
CLIP#2 will be used for the IPinIP outer encapsulation of L3 VPN traffic for all IPVPNs except the Internet
IPVPN. IPVPN-Lite capability needs to be enabled on it.
Site 1
CLI
Site1:5# config ip circuitless-ip-int 2 create 172.16.1.254/24
Site1:5# config ip circuitless-ip-int 2 ipvpn-lite-capability enable
ACLI
Site1:5(config)# interface loopback 2
Site1:5(config-if)# ip address 172.16.1.254/24
Network Design Implementation to Provide L2 & L3 VPN Connectivity
37
November 2010
between Sites using SMLT and IPVPN-Lite for ERS 8600
Technical Configuration Guide