Avaya 8600 Technical Configuration Manual page 22

avaya.com
Site 2
CLI
ERS-8610:5# config cli prompt "Site2"
ACLI
ERS-8610:5> enable
ERS-8610:5# config terminal
ERS-8610:5(config)# prompt "Site2"
Site 3
CLI
ERS-8610:5# config cli prompt "Site3"
ACLI
ERS-8610:5> enable
ERS-8610:5# config terminal
ERS-8610:5(config)# prompt "Site3"
Site 4
CLI
ERS-8610:5# config cli prompt "Site4"
ACLI
ERS-8610:5> enable
ERS-8610:5# config terminal
ERS-8610:5(config)# prompt "Site4"
Site 5
CLI
ERS-8610:5# config cli prompt "Site5"
ACLI
ERS-8610:5> enable
ERS-8610:5# config terminal
ERS-8610:5(config)# prompt "Site5"
2.2.2.3 Configuring edge & firewall interfaces
The edge interface 4/1 on all Sites and the interface connecting to FW1 & FW2 (4/10 at Site1 & Site2) are
enabled for q-tagging and removed from default VLAN 1. The firewall interface will also have Spanning
Tree disabled.
Network Design Implementation to Provide L2 & L3 VPN Connectivity
22
November 2010
between Sites using SMLT and IPVPN-Lite for ERS 8600
Technical Configuration Guide