Avaya 8600 Technical Configuration Manual page 19

2. SMLT Configuration

IST Configuration on Cluster devices

SMLT Configuration on Cluster devices

MLT Configuration on SMLT edge devices

Configuring VLACP on SMLT & IST Core links
3. L2 VPN Service Configuration (L2 VLANs)

L2 VLAN10 spanning all 5 Sites

L2 VLAN 11 spanning Sites 1, 2, 4 & 5

L2 VLAN 12 spanning Sites 2, 3 & 5

L2 VLAN 13 spanning Sites 1, 3 & 4
4. Configuring the Circuitless (CLIP) interfaces

CLIP#1 Configuration

CLIP#2 Configuration

CLIP#3 Configuration
5. L3 IGP Core Configuration

Creation of IGP Core VLANs

OSPF Configuration

RSMLT Configuration
6. BGP Configuration

Global BGP Configuration

Creation of full mesh of IBGP peers with VPNv4 and IP VPN-Lite capability enabled
7. L3 VPN Configuration

VRF and edge Vlan/Network creation for Green IPVPN-1

Configuring IPVPN RD & RT on the VRF for Green IPVPN-1

VRF and edge Vlan/Network creation for Red IPVPN-2

Configuring IPVPN RD & RT on the VRF for Red IPVPN-2
8. Internet L3 VPN Configuration

Configuration of Internet VRFs as well as Firewall connectivity

Configuring IPVPN RD & RT on the VRFs for the Internet IPVPN
9. Configuring the network for correct QOS operation

Configuring DiffServ Core links

Configuring ACLs to remark/set QOS for L2-VLANs

Configuring Policers for L2-VLANs
Network Design Implementation to Provide L2 & L3 VPN Connectivity
November 2010
between Sites using SMLT and IPVPN-Lite for ERS 8600
Technical Configuration Guide
avaya.com
19