Avaya 8600 Technical Configuration Manual page 26

avaya.com
Site2:5# config mlt 32 ist enable
ACLI
Site2:5(config)# vlan create 4000 name "IST-VLAN" type port 1
Site2:5(config)# interface Vlan 4000
Site2:5(config-if)# ip address 10.0.255.2 255.255.255.252
Site2:5(config-if)# exit
Site2:5(config)# mlt 32 enable name "IST"
Site2:5(config)# mlt 32 member 2/3,3/3
Site2:5(config)# mlt 32 vlan 4000
Site2:5(config)# mlt 32 encapsulation dot1q
Site2:5(config)# interface mlt 32
Site2:5(config-if)# ist peer-ip 10.0.255.1 vlan 4000
Site2:5(config-if)# ist enable
Site2:5(config-if)# exit

Spanning Tree Protocol (STP) is automatically disabled on IST interfaces
2.2.3.2 SMLT Configuration on Cluster devices
Both Site1 and Site2 (only Site1 shown)
CLI
Site1:5# config mlt 1 create
Site1:5# config mlt 1 add ports 2/1
Site1:5# config mlt 1 name "Site3"
Site1:5# config mlt 1 perform-tagging enable
Site1:5# config mlt 1 smlt create smlt-id 1
Site1:5# config mlt 2 create
Site1:5# config mlt 2 add ports 3/1
Site1:5# config mlt 2 name "Site4"
Site1:5# config mlt 2 perform-tagging enable
Site1:5# config mlt 2 smlt create smlt-id 2
Site1:5# config mlt 3 create
Site1:5# config mlt 3 add ports 3/2
Site1:5# config mlt 3 name "Site5"
Site1:5# config mlt 3 perform-tagging enable
Site1:5# config mlt 3 smlt create smlt-id 3
ACLI
Network Design Implementation to Provide L2 & L3 VPN Connectivity
26
November 2010
between Sites using SMLT and IPVPN-Lite for ERS 8600
Technical Configuration Guide