Shift For Digits And Soft Keys - Siemens SIMATIC HMI OP3 Equipment Manual

In combination with SHIFT:
SHIFT
SHIFT
SHIFT
SHIFT
The numeric and arrow keys have a auto repeat function. If you keep a key
pressed, your input is continually repeated after a short delay until you
release the key.
Operation Notes If several keys are pressed in quick succession, some operator inputs may be
lost. Operator inputs not accepted by the OP3 are indicated by an acoustic
signal.
3.1.1

SHIFT for Digits and Soft Keys

SHIFT Depending on the configuration, you can set whether you want to assign
SHIFT to digits or soft keys. You perform the setting in ProTool by choosing:
System
Example:
If you frequently change between screens, it is practical to assign SHIFT not
to soft keys but to digits. For inputs, you then press SHIFT and the
corresponding numeric key.
Operator Panel OP3
Edition 11/99
+ : Scroll up in font.
+ : Scroll down in font.
+ : Next position in an input field.
+ : Previous position in an input field.
Settings from the menu.
General Operation
3-3