Configuring Cs_Ctl Qos; Cs_Ctl Qos Features - Qlogic QLE2740L-DEL User Manual

3–Fibre Channel Configuration

Configuring CS_CTL QoS

For information about using Fibre Channel trace route in QConvergeConsole
VMware vCenter Server Plug-in or QConvergeConsole VMware vSphere Web
Client Plug-in, see the section "Diagnostic Tests—Fibre Channel Port" in the
User's Guide—QConvergeConsole Plug-ins for VMware vSphere (part number
SN0054677-00).

Configuring CS_CTL QoS

NOTE
For information about end-to-end CS_CTL QoS, see
End-to-End CS_CTL QoS" on page
This section provides the following information on class-specific control (CS_CTL)
quality of service (QoS):


CS_CTL QoS Features

 Enabling CS_CTL QoS Mode for the Initiator and Target Ports
 Verifying and Confirming CS_CTL Mode Setup for Each Port
 Creating a Virtual Port from the Adapter's Port in QConvergeConsole GUI
 Setting the QoS Priority Level for a Virtual Port in QConvergeConsole GUI
CS_CTL QoS Features
The following highlights some of the features of the CS_CTL QoS:
Traffic priority classification for QLogic Gen6 Fibre Channel SAN. QoS at the

packet level is realized by using the CS_CTL field, which is specified in the
FC-FS-2 specification. QoS allows one to prioritize frames between a host
and target, depending on the value of the CS_CTL field in the FC Frame
header.
 Extending QoS from the fabric to the host
 Enables QLogic Fibre Channel users to rapidly scale server virtualization
without compromising service-level agreements
 Benefits for both physical and virtual server deployments
 Supported configuration:


QLogic 2700 Series Adapters
CS_CTL-based QoS is end-to-end (requires target to support
CS_CTL)
84.
81
"Configuring
BK3254601-00 C