Setting Fibre Channel Adapter Parameters; Setting Fibre Channel Adapter Parameters With; Qconvergeconsole Gui; Setting Fibre Channel Adapter Parameters With Interactive - Qlogic QLE2740L-DEL User Manual

3–Fibre Channel Configuration

Setting Fibre Channel Adapter Parameters

Setting Fibre Channel Adapter Parameters

Use QConvergeConsole to set Fibre Channel adapter parameters:
 Setting Fibre Channel Adapter Parameters with QConvergeConsole GUI


Setting Fibre Channel Adapter Parameters with Interactive

QConvergeConsole CLI



Setting Fibre Channel Adapter Parameters with Noninteractive

QConvergeConsole CLI

Setting Fibre Channel Adapter Parameters with

QConvergeConsole GUI

For information about how to set Fibre Channel adapter parameters using
QConvergeConsole GUI, refer to the topic about managing Fibre Channel and
Fibre Channel over Ethernet (FCoE) adapter ports in the QConvergeConsole
Help.
Setting Fibre Channel Adapter Parameters with Interactive
QConvergeConsole CLI
To set Fibre Channel adapter parameters with interactive
QConvergeConsole CLI:
1. On the Fibre Channel Adapter Configuration menu, select HBA
Parameters.
2. On the port menu, select a port to open the HBA Parameters menu.
3. On the HBA Parameters menu, select the Configure HBA Parameters
option to open the Configure Parameters menu.
For more information, refer to the section about the Fibre Channel interactive
commands in the User's Guide—QConvergeConsole CLI (part number
SN0054667-00).
Setting Fibre Channel Adapter Parameters with
Noninteractive QConvergeConsole CLI
For information about how to set Fibre Channel adapter parameters using the
noninteractive mode of QConvergeConsole CLI, refer to the section about the
Fibre Channel noninteractive commands in the User's
Guide—QConvergeConsole CLI (part number SN0054667-00).
43 BK3254601-00 C