Qconvergeconsole Gui; Introduction To Qconvergeconsole Gui - Qlogic QLE2740L-DEL User Manual

C

QConvergeConsole GUI

This appendix provides the following information about QConvergeConsole GUI:





NOTE

Introduction to QConvergeConsole GUI

QConvergeConsole GUI is a Web-based client and server GUI management tool
that provides centralized management and configuration of QLogic adapters
within the entire network (LAN and SAN).
On the server side, QConvergeConsole GUI runs as an Apache Tomcat™
application server. After QConvergeConsole GUI is launched on the application
server, you can connect to QConvergeConsole GUI through a browser, either
locally on the server or remotely from another computer. Your browser window
becomes the client used to connect to servers that host the QLogic adapters and
connected storage devices within the network.
Use the QConvergeConsole GUI main window to connect to servers that host
QLogic adapters. Each host server can include a combination of the following
QLogic adapters:



Introduction to QConvergeConsole GUI
"Downloading QConvergeConsole Documentation" on page 111
"Downloading and Installing Management Agents" on page 111
"Installing QConvergeConsole GUI" on page 112
"What Is in the QConvergeConsole Help System" on page 115
For information on installing QConvergeConsole GUI, refer to the
Installation Guide—QConvergeConsole GUI (part number SN0051105-00).
All procedural information for the QConvergeConsole GUI utility is covered
in the QConvergeConsole Help.
4Gb and 8Gb Fibre Channel Adapters (QLx24xx and QLx25xx)
8Gb Fibre Channel-to-PCIe Mezzanine Card (QME2572)
16Gb Fibre Channel Adapters (QLE266x-DEL, QLE269x-DEL,
QLE269xL-DEL)
110 BK3254601-00 C