Running The Firmware Update From The Command Line - Qlogic QLE2740L-DEL User Manual

3–Fibre Channel Configuration
Updating the Dell Firmware
3. When complete, the installer indicates the result of the installation
(Figure
4. To complete the installation, click Finish

Running the Firmware Update from the Command Line

Running the firmware Dell update package from the command line, with no
options specified, results in the same behavior as double-clicking the icon
representing the Dell update package. Note that the actual file name of the Dell
update package will vary.
C:\> Network_Firmware_2T12N_WN32_<version>_X16.EXE
3-4). Click Yes to elect to reboot.
Figure 3-4. Result of Installation
Figure 3-5. Finish Installation
35
(Figure 3-5).
BK3254601-00 C