Setting Qos By Priority - Qlogic QLE2740L-DEL User Manual

3–Fibre Channel Configuration
Configuring Virtual Ports (NPIV)

Setting QoS by Priority

To set the QoS by priority with QConvergeConsole GUI:
1. In the QConvergeConsole tree pane on the left, expand a 2700 Series
Adapter.
2. Select a virtual port.
3. In the content pane on the right, click the QoS tab.
4. In the QoS Type box, select Priority.
5. Move the slider to select a low, medium, or high priority, as shown in
Figure
6. Click Save.
To set the QoS by priority with interactive QConvergeConsole CLI:
1. From the Fibre Channel Adapter Configuration menu, select the QoS
option.
2. From the port menu, select a port to open the QoS Type Menu. Select 1:
QoS Priority to set the priority.
3-10.
Figure 3-10. Setting the QoS by Priority
52 BK3254601-00 C