Setting Fa-Pwwn With Qconvergeconsole Vmware Plug-Ins; Setting The Fa-Pwwn From The Brocade Switch; Setting The Fa-Pwwn From The Switch - Qlogic QLE2740L-DEL User Manual

3–Fibre Channel Configuration
Setting an FA-PWWN
1: Port
2: Port

Setting FA-PWWN with QConvergeConsole VMware Plug-ins

For information about setting a FA-PWWN using the QConvergeConsole VMware
vCenter Server Plug-in or QConvergeConsole VMware vSphere Web Client
Plug-in, see the section "Managing a Fibre Channel Adapter Port" in the User's
Guide—QConvergeConsole Plug-ins for VMware vSphere (part number
SN0054677-00).

Setting the FA-PWWN from the Brocade Switch

From the Brocade switch, you can set a FA-PWWN and a static FA-PWWN. For
the most current information, refer to the Brocade switch documentation.

Setting the FA-PWWN from the Switch

Figure 3-19
Figure 3-19. Setting the FA-PWWN from the Brocade Switch
After refreshing the Brocade switch, the Device Port WWN appears in Web Tools
as shown in
Figure 3-20. Device Port WWN for Brocade Switch
1: WWPN: 21-00-00-0F-1F-11-4A-30 Link Down
2: WWPN: 50-00-53-37-63-FA-00-05 Online
shows the FA-PWWN setting from the Brocade switch.
Figure 3-20.
67 BK3254601-00 C