3–Fibre Channel Configuration
Using a Fabric-Assigned Boot LUN
Using a Fabric-Assigned Boot LUN with Noninteractive QConvergeConsole
CLI
Using a Fabric-Assigned Boot LUN with QConvergeConsole Plug-ins
Using a Fabric-Assigned Boot LUN in QConvergeConsole GUI
For details about how to use a fabric-assigned LUN in QConvergeConsole GUI,
refer to the "Fabric-Assigned Boot LUN" topic in the QConvergeConsole Help.
Using a Fabric-Assigned Boot LUN in Interactive
QConvergeConsole CLI
To use a fabric-assigned boot LUN with interactive QConvergeConsole CLI:
1.
From the main menu, select the adapter type (Fibre Channel Adapter).
2.
On the Fibre Channel Adapter Configuration menu, select Boot Devices
Configuration.
appears.
3.
On the Boot Device Settings menu, select Configure Boot Device(s), and
then press the ENTER key.
4.
Select Enable Fabric Assigned Boot LUN, and then press ENTER.
5.
On the Enable Fabric Assign Boot LUN menu, type 1 to enable this
feature.
Using a Fabric-Assigned Boot LUN with Noninteractive
QConvergeConsole CLI
In noninteractive QConvergeConsole CLI, set a target as the fabric-assigned boot
LUN for a specific adapter by issuing the following command:
# qaucli -pr fc -e
FabricAssignBootLUN|fb
Where:
FabricAssignBootLUN or fb = Configure enable fabric-assigned boot LUN setting
<hba instance>|<hba wwpn> enable|disable
hba instance =
Adapter number (use the -g command to find)
hba wwpn =
Worldwide port name of the adapter
74
BK3254601-00 C