3–Fibre Channel Configuration
Enabling QLogic Forward Error Correction
NOTE
i
Instead of having to request retransmission of the entire data frame, the
receiving device can recreate or reconstruct the data stream itself. This
process prevents multiple CRC errors from being triggered and causing
application performance issues.
Enabling QLogic FEC
QLogic FEC is disabled by default. To enable the QLogic FEC feature, contact
QLogic
Forward Error Correction, (part number 83830-514-03). In
QConvergeConsole CLI interactive mode Adapter Information menu shows a
port with an online FEC status.
Figure 3-41. QConvergeConsole CLI Adapter Information Menu, FEC Status
Support, or refer to the QLogic document, Application Note: Enabling
95
Figure
3-41, the
BK3254601-00 C