Installing Qconvergeconsole Vmware Vsphere Web Client Plug-In - Qlogic QLE2740L-DEL User Manual

2–Driver Installation and Configuration
VMware Driver Installation and Configuration
NOTE
For more details on vihostupdate, see the vSphere Command-Line
Interface Installation and Reference Guide, located here:
http://www.vmware.com/pdf/vsphere4/r40/vsp_40_vcli.pdf
Installing QConvergeConsole VMware vSphere Web Client
Plug-in
1. Gather the information necessary for the installation, including:



2. Run the installer on the server providing the Tomcat service. Provide the
information requested by the installer.


3. Restart the Tomcat service.
IP address of the vCenter Server
vCenter Server credentials (user name and password)
Where to host the QConvergeConsole VMware vSphere Web Client
Plug-in (on vCenter Server or other server)
If you are hosting the QConvergeConsole VMware vSphere Web
Client Plug-in on a non-vCenter Server, make sure the server has
Tomcat running as a service and have the IP address of the Tomcat
instance ready. Also, make sure the Tomcat CATALINA_HOME
environment variable is set to the appropriate directory.
On Windows, double-click the installer and follow the instructions on
the GUI provided.
On Linux:
a. Make sure the user is the root user (or has root privileges).
b. Create the installer executable if one does not already exist.
Choose the installer for your system (32-bit or 64-bit), and then
issue the following command:
chmod +x <installer>
Where <installer> is the file name of the installer.
c. Run the installer by issuing the following command:
./<installer>
Where <installer> is the file name of the installer.
d. Follow the instructions provided by the installer.
30 BK3254601-00 C